+86 0851-84487289
Compact Substation
YBD口-12 Series Prefabricated Buried Compact Substation
YBD口-12 Series Prefabricated Buried Compact Substation
YBD口-12 Series Prefabricated Buried Compact Substation consists of buried transformer and high and low voltage power distribution unit located on the ground. Its transformer can run safely in water for a period of time, and the power distribution unit is usually decorated with lightbox billboards, which can be perfectly combined with the surrounding environment, especially suitable for both sides of urban roads and inside residential areas. The cost of the equipment can be recovered in a short time due to the profitable lightbox billboards.
Normal Operating Conditions
Altitude ≤1000m.
Ambient Temperature: -45℃~+40℃. Maximum monthly average temperature: +35℃. Maximum annual average temperature: +25℃.
Requirements for installation environment:
  • Suitable for sites without explosive gas, corrosive liquid and gas, dust that can destroy insulation and violent vibration, and it is allowed to be partially or completely submerged in water for a certain period of time.
  • Gravitational acceleration caused by earthquake (ag): lower than 3m/S2 in the horizontal direction; lower than 1.5m/S2 in the vertical direction.
  • Waveform of power supply voltage: approximate sine wave.
  • Symmetry of three-phase power supply: For three-phase underground transformer, the voltage of three-phase power supply should be roughly symmetrical.

Note: The special written instructions are required when ordering beyond the NORMAL OPERATING CONDITIONS.
Model Definition
YBD口-12 Series Prefabricated Buried Compact Substation
Technical Parameters
YBD口-12 Series Prefabricated Buried Compact Substation
Product Features
  • Suitable for urban environment, which can be installed in basement or pit, especially in densely populated central cities. Suitable for lighting and power system of streets, highways, bridges, tunnels, parking lots, airports, ports, tourist attractions, etc.
  • High and low voltage incoming and outgoing lines are all connected in a waterproof, fully sealed, fully insulated and fully shielded way.
  • The shell of substation is made of corrosion-resistant stainless steel and fully sealed, which can be immersed in water for a period of time and run safely.
  • The protection system fully considers the convenience and safety of operation.
  • The heat dissipation condition is fully considered and the transformer is designed with low loss.
  • Waterproof entry protection and automatic drainage measures are adopted in the transformer pit.
  • The low-voltage cabinet adopts a double-door structure with the protection level of IP34. The second floor is an instrument door, which ensures that the low-voltage cabinet still keeps a complete and independent protection level of outdoor low-voltage products after the lightbox shell is destroyed. The low-voltage main circuit breaker adopts a compact imported frame circuit breaker or an electronic molded case circuit breaker.
  • The low-voltage cabinet adopts outdoor lightbox-type protective shell with billboards on both sides, and small and energy-saving LED luminous components are adopted.
  • The frame of buried substation is prefabricated, which can be prefabricated flexibly with different materials according to customer requirements.
  • The products are highly prefabricated, which makes the on-site installation simple and fast.